Table of Contents
Advertisement
Chapter 2 Preparations
Connecting a RAID controller (N8103-206/210) and an extra 2.5-inch HDD cage (N8154-83F)
When the RAID controller (N8103-206/210) is additionally installed, and the additional 2.5-type HDD
cage (N8154-83) is installed, install OS to the 2.5-type HDD cage. Connect the SATA cable attached
to the 3.5-type HDD cage (N8154-84), optional KK410-444(00) RAID LED cable, and K410-364(00)
built-in SAS/SATA cable. For the additional 2.5-type HDD cage (N8154-83), the attached SATA cable is
not used. At first, install the hard disk drive into the leftmost slot viewing from the front side, and then
install the remaining disks in order.
(N8103-206/210)
Slot 6: Fourth Hard Disk Drive
RAID LED cable (included with K410-444(00))
Flash backup unit control cable (provide with the N8103-209)
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
Slot 0: First Hard Disk Drive
Slot 1: Second Hard Disk Drive
(N8103-209)
Slot 5: Third Hard Disk Drive
87
Advertisement
Table of Contents
