Table of Contents
Advertisement
Chapter 2 Preparations
1.14
High Temperature Resistant kit
The N8181-140F high-temperature resistant kit of this server enables you to use this server under the
environment of 5°C to 48°C.
When the high-temperature resistant kit is purchased, the following configuration is required.
• SDR is the dedicated setting.
• The cooling fan (for rear) is used as the dedicated fan.
• When N8154-82F 2.5-inch Hot Plug Drive Cage Kit is used, the air duct (for HDD) is added. In this case,
length of the card that can be mounted to PCI slots 1 to 3 is limited to 148 mm or shorter.
• Use of N8154-83F 2.5-inch Hot Plug Drive Cage Kit is not allowed.
• The backup device cannot be mounted.
• You can install N8118--307 Dual M.2 SATA mount kit only when 3.5-inch cage is installed.
• N8181-152 Internal battery module cannot be used.
• N8181-153 Internal battery controller cannot be used.
For details, see the User's Guide that comes with N8181-140F High Temperature Resistant Kit.
82
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
