Table of Contents
Advertisement
This manual has important safety
information. Read through it carefully
before operating this machine to
prevent personal injury or machine
damage. Learn the operation, limitation
and the specific potential hazards
peculiar to this band saw. All users must
read it before performing any activity on
the machine, such as replacing the saw
band or doing regular maintenance.
Disconnect the power cord before
making adjustment, maintenance or
blade changes.
Do not operate this machine unless it is
completely assembled.
Make sure the power switch is off before
plugging in power cord.
Always remember to switch off the
machine when the work is completed.
Use recommended accessories.
Improper accessories may be hazardous.
Never hold the material by hand for
cutting. Always use the vise and make
sure the material is clamped securely
before cutting.
When a workpiece is too long or heavy,
make sure it is supported with a roller
table (recommended).
Keep your work area well illuminated at
minimum 500 lumen.
Remove adjusting keys, wrenches or any
loose parts or items from the machine
before turning on power.
Use a sharp saw blade and keep the
machine in its best and safest
performance by following a periodical
maintenance schedule.
1-2
Wear proper apparel during operation
and when servicing the machine. Some
personal protective equipment is
required for the safe use of the machine,
e.g. protection goggles.
Moving parts should be kept in proper
alignment and connection with the
machine. Check for breakage, mounting
and any other conditions that may
affect its operation. Any damaged part
or guard should be properly repaired or
replaced.
It is dangerous to operate the machine
when the floor is slippery. Keep the floor
clean and dry. Check for ice, moisture, or
grease before entering.
Do not use the machine to cut explosive
material or high pressure vessels as it
will generate great amount of heat
during the sawing process and may
ignite an explosion.
Keep your work area clean. Cluttered
and slippery floors invite accidents.
Keep blade protection cover and wheel
covers in place and in working order.
Never operate while under the influence
of drugs, alcohol or medication.
Do not reach over or stand on any part
of the machine.
Keep the work environment safe. Do not
use band saw in a damp or wet location.
Keep all guards and shields in place
before installing or starting up the
machine.
Keep unauthorized personnel away.
Advertisement
Table of Contents
