Standard Accessories - Sharp SW-165HT Instruction Manual

STANDARD ACCESSORIES

Blade tension device
Blade speed/motion detector
Inverter
Quick approach device
4-8
 This blade tension device equipped with hydraulic cylinder
provides appropriate tension to the saw blade.
 To tighten the saw blade, turn the selector to
 Upon saw blade breakage, the safety device will activate and
automatically stop all machine operation.

The limit switch of the safety device can be reset by turning the
blade tension selector to

To change the blade, turn the handle to
blade tension.

Besides detecting the blade speed, the speed/motion detector also
functions as a safety device.

The speed/motion detector protects operators and the machine by
preventing blade overloads and consequent damages if a saw
blade breaks or skids.

Once blade breakage or slippage is detected, the drive wheel will
stop in 10 seconds.

The inverter is installed under the workbed. The inverter is used to
control and stabilize the saw blade speed during cutting.

To adjust blade speed, use the blade speed control knob on the
control panel.
Note:
1. Make sure the terminal points are connected.
2. Make sure the ambient temperature is within acceptable range and
keep the surroundings well ventilated.
3. Keep the inverter away from dust.
4. For repair or maintenance, please contact your local agent.
This device allows the blade to quickly descend to just right above the
material to save you operation time.
.
.
to release saw