Sharp SW-165HT Instruction Manual page 41

Gear reducer
Coolant pump
Powered wire brush
Miter cut angle
Angle lock handle
Protractor & pointer
The specially designed gear reducer can work toward your preset blade
speed and torque.
Please refer to section 8 for information on maintenance.
The coolant pump supplies coolant to cool off cutting temperatures
during cutting. Also, it can be used to wash off chips.
The wire brush is hydraulically driven to rotate at the same speed as the
blade motor. It removes the metal chips on the saw blade teeth to so
that blade life can be extended.
Keep hands away from the transmission shaft and the brush while the
wire brush is running
Turn off the hydraulic motor or the main power switch before performing
maintenance or cleaning on the wire brush drive system.
The swivel sawhead allows the user to cut at any angle between 0°
(straight cut) and 60° (miter cut). The angles have been accurately
configured before machine shipment.
For your miter-cutting jobs, simply loosen the angle lock handle,
swivel the saw bow until the pointer points to your desired angle
and lock the saw bow via angle lock handle.
4-9