Table of Contents
Advertisement
UNPACKING & INSPECTING
Unpack your machine carefully to avoid damage to machine parts or surfaces.
Upon arrival of your new band saw, please confirm that your machine is the correct model and it
comes in the same specification you ordered by checking the model plate on the machine base.
It is also imperative that a thorough inspection be undertaken to check for any damage that
could have occurred during shipping. Pay special attention to machine surface, equipments
furnished and the electrical and hydraulic systems for damaged cords, hoses and fluid leaks.
In the event of damage caused during shipping, please contact your dealer and consult about
filing a damage claim with the carrier.
Your machine comes in with a set of tools for you to maintain the machine. The accessories
furnished are as follows:
1.
Tool box
2.
Grease gun
3.
Screwdriver (+, -)
4.
Open-ended spanner
5.
Hexagon wrench
6.
Chip spade (only for manual models)
7.
Operation manual
Should you find any missing accessories, please contact your local agent immediately.
3-2
1 pc
1 pc
2 pcs
3 pcs
1 set
1 pc
1 pc
Advertisement
Table of Contents
