Sharp SW-165HT Instruction Manual page 71

Grease Injection Hole:
Grease Injection Nozzle
Grease Injection Nozzle
Lubricating Oil Injection for Main shaft (double column) ( if applicable ):
Manual injection device
Pull up & inject for
seconds until the
volume over 50%.
Grease Injection Nozzles at the middle of drive wheel
1.
and idle wheel;
(You need to rotate the wheel until you ssee the Grease
injection nozzle.)
: The position of injection indicating.
Please inject the grease into the Nozzle.
2.
1. Grease Injection Nozzle on the blade tension device.
: The position of injection indicating.
Please inject the grease into the Nozzle.
3.
1. Two manual injection device for two main
2. Pull up & inject lubricating oil for seconds
3.
Volume window
shafts (double column)
: The position of injection indicating.
Recommend always keeping the volume over
50% inside the vessel of volume window.。
8-3