Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
4.2.4.12 Front Frame
The Main Frame becomes unstable once it is removed from the
Base Frame. Be careful not to deform the frame during
performing the following procedures.
◼ Refer to
4.2.4.11 Main Frame (p144)
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame
Removal procedure
Remove the screw (x1) that secures the FFC Holder, and remove the FFC
1.
Holder. (See
Fig.
4-109.)
Remove the screws (x2) that secure the Front Frame, and remove the Front
2.
Frame.
Front side
Figure 4-109. Removing the Front Frame
Align the positioning holes (x2) of the Front Frame with dowels (x2)
of the Main Frame. (See
DISASSEMBLY/ASSEMBLY
for the Parts/Components
FFC Holder
Positioning hole & dowel
Front Frame
C.B.P. 3x8 (6±1Kgfcm)
C.B.S. 3x4 (8±1Kgfcm)
Fig.
4-109)
https://www.manualsbooks.com
4.2.4.13 EJ Frame Assy / EJ Release Frame Assy R/
EJ Release Frame Assy L
The Main Frame becomes unstable once it is removed from the
Base Frame. Be careful not to deform the frame during
performing the following procedures.
◼ Refer to
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame/Front Frame
Removal procedure
Remove the securing ring from the EJ Frame Shaft and remove the Spur Gear
1.
A. (See
Fig.
Remove the screw (x1) that secures the EJ Release Frame Assy R, and
2.
remove the EJ Release Frame Assy R.
Figure 4-110. Removing the EJ Release Frame Assy R
Disassembly Procedures
4.2.4.11 Main Frame (p144)
for the Parts/Components
4-110.)
EJ Frame Shaft
Spur Gear A
Securing ring
EJ Release Frame Assy R
Revision C
Positioning hole & dowel
C.B.S. 3x6 (8±1Kgfcm)
147
Confidential