Adf Motor Unit - Epson Stylus Photo PX700FW Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.6.9 ADF Motor Unit

Parts/Components need to be removed in advance:
Scanner Unit/ADF Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover/ADF
Document Support Assy/ADF Frame Unit
Removal procedure
Peel off the acetate tape (x3), and separate the ADF Motor cable, the ADF
1.
Sensor cable and the Grounding Wire.
Release the hooks (x4) of the ADF Cable Cover and open the ADF Cable
2.
Cover, then release the ADF Motor cable, the ADF Sensor cable and the
Grounding Wire.
ADF Cable Cover
Acetate tapes (x2)
Grounding Wire
Figure 4-193. Releasing the cables
DISASSEMBLY/ASSEMBLY
Acetate tape
ADF Sensor cable
ADF Motor cable
Hook
Disassembly Procedures
https://www.manualsbooks.com
When removing the ADF Motor Unit, be careful not to drop the
gears (x5) of the ADF Frame Unit and ADF Motor Unit shown
below.
ADF Frame Unit
Figure 4-194. Handling the ADF Motor Unit
3. Remove the screws (x2) that secure the ADF Motor Unit.
ADF Motor Unit
Figure 4-195. Removing the ADF Motor Unit (1)
Revision C
Do not drop these.
Do not drop these.
C.B.P. 3x8 (6±1kgfcm)
Confidential
181