Table of Contents
Advertisement
Display LCD
The battery charger has 3 monitor menus. Use the P2 button to navigate between the menus.
MONITOR1
Next is a summary of the information reported respectively in the 3 MONITOR displays.
MONITOR1
Row
Example
(1)
Pb 1Pb ST 48V /35A
(2)
43.3 V 35A
(3)
Ah= 8 Tc= 0h15m29s
(4)
PhI1 CHARGE
(5)
-- Messages
MONITOR2
Row
Example
(1)
43.4V 35A
(2)
(3)
7Ah PhI1
13m22s
(4)
-- Message
MONITOR3
Row
Example
(1)
CYCLE N= 53 – Ph 2
(2)
C1ID=1PB ST_01.0001
(3)
Vbif=2.39V/el = 57.4V
(4)
Vbef=2.40V/el = 57.7V
(5)
Ibif= 33A Ibef= 21A
(6)
Tf =0h0m Tef=0hm
(7)
Ahf= 0 AhEf = 0
(8)
-- Message
21.07.2023
MONITOR2
P2
P2
Description
Technology of the battery, type of curve, size of the battery charger
Battery voltage and current
Ah charged, charging time in hours, min, sec
Current charging phase, status of the battery charger
(for example phase = auto start A0, Status= BATTERY NOT
CONNECTED)
Possible fault or status messages
Description
Battery voltage and current
Active charging profile as follows:
Phase completed (bold line)
Current phase (flashing line)
Phase to conduct (thin line)
Ah charged, charging time in hours, min, sec
Possible fault or status messages
Description
Number of charging cycle and current charging phase
For example charging cycle 53 and phase 2
Unique code of the charging curve
Battery voltage at the beginning of the phase (Vbif) first expressed as
element voltage (V/el) and then as absolute voltage (V)
Battery voltage at the end of the phase (current phase) (Vbef) first
expressed as element voltage (V/el) and then as absolute voltage (V)
Current at the beginning of the phase (Ibif) and current at the end of
the phase (Ibef)
Time of the individual phase (Tf) and Overall charging time at the end
of the phase (Tef)
Ah output in the selected phase Ahf) and overall charged Ah (AhEf)
It reports any faults that took place during the charging cycle
MONITOR3
P2
47
Advertisement
Table of Contents
