Table of Contents
Advertisement
3.1
General Safety Rules
Warning: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions can result in electric shock, fire, explosions and / or serious injuries or death to the
operator or others.
•
Save all warnings and instructions.
•
Comply with all applicable laws and regulations.
•
The operator and the employer of the operator must know and prevent the risks during operation of
the product.
•
Do not let a person operate the product unless they read and understand the contents of the
operator's manual.
•
Only authorized and trained personnel is allowed to operate this machine. This machine is not
intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge.
•
It is the responsibility of the operator to analyse the work surface. Operate the product only on a clean
surface without any substances that can cause fire, explosion or are dangerous to health. The user
makes a risk assessment based of the information about the surface and takes proper precautions for
the work to be performed.
•
In case of any inappropriate usage, improper operation or repair, the producer shall be exempt from
liability.
•
Maintenance work that goes beyond the scope described in this manual must only be performed by
qualified Husqvarna technicians.
•
Do not operate the product unless you receive training before use. Make sure that all operators receive
training.
•
The operator is responsible for accidents that occur to other persons or their property.
•
Do not use the product if you are tired, ill, or under the influence of alcohol, drugs or medicine.
•
Always be careful and use your common sense.
•
This product produces an electromagnetic field during operation. This field can under some
circumstances interfere with active or passive medical implants. To decrease the risk of serious injury
or death, we recommend persons with medical implants to speak to their physician and the medical
implant manufacturer before operating this product.
•
Keep the product clean. Make sure that you can clearly read signs and decals.
•
Do not use the product if it is damaged or does not operate correctly.
•
Do not do modifications to this product.
•
Do not operate the product if it is possible that other persons have done modifications to the product.
3.2
Work area safety
•
Do not use the machine in rain, damp or wet locations.
•
Avoid dangerous environments. Do not work in the presence of explosive atmospheres, in the presence
of flammable liquids, gases or dust. Remove materials or debris that can be ignited by sparks.
•
The product creates sparks and flammable material can create ignition with the dust or fumes.
•
Make sure that the working surface is clean. Remove all stones, screws etc. to prevent serious damage
if they get inside the machine.
•
Make sure that there is enough ambient light on the work area. Cluttered or dark areas can cause
accidents.
•
Do not use the machine on wood.
•
Only load and unload the machine on a levelled and horizontal surface. Steep inclines can cause a
dangerous situation when you lose control over the machine!
•
It is necessary to provide for an adequate air change rate L in the room if the exhaust air is returned to
the room. Comply with the national regulations.
•
Keep children and bystanders away while operating the machine. They cannot foresee the potential
dangers of the machine. Distractions can cause you to lose control of the machine.
•
Persons who are not operating the machine must not be permitted to stay in the surrounding area of at
least 15 meter from the machine.
•
Never use the machine when the surface is not clear and if there is a risk of stumbling or tripping.
•
Make sure that there are no cables or hoses in the driving direction of the machine.
•
Make sure that there no objects standing or situated on the surface.
21.07.2023
3. Safety
7
Advertisement
Table of Contents
