Transport Position
When transporting a load, keep the attachment as
close to the ground as possible, no more than 15 cm
(6 inches) above the ground. Tilt it rearward to keep
the load level.
Figure 18
1. No more than 15 cm (6
inches) above the ground
g240205
2. Tilt the load rearward
After Operation
After Operation Safety
General Safety
•
Engage the parking brake (if equipped), lower
the loader arms, shut off the engine, remove the
key, wait for all movement to stop, and allow the
machine to cool before adjusting, cleaning, storing,
or servicing it.
•
Clean debris from the attachments, drives,
mufflers, and engine to help prevent fires. Clean
up oil or fuel spills.
•
Keep all parts in good working condition and all
hardware tightened.
•
Do not touch parts that may be hot from operation.
Allow them to cool before attempting to maintain,
adjust, or service the machine.
•
Use care when loading or unloading the machine
into a trailer or truck.
Moving a Non-Functioning
Machine
Important:
Do not tow or pull the machine
without first opening the tow valves, or you will
damage the hydraulic system.
1.
Shut off the engine and remove the key.
2.
Open the rear-access cover.
3.
Using a wrench, turn the tow valves on the
hydraulic pumps twice counter-clockwise
19).
21
(Figure