Table of Contents
Advertisement
11.
Tighten the bolts securing the front weights
(Figure
29).
12.
Install the side screens and close the hood.
Lubrication
Greasing the Machine
Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease
1.
Park the machine on a level surface, engage
the parking brake (if equipped), and lower the
loader arms.
2.
Shut off the engine and remove the key.
3.
Clean the grease fittings with a rag.
4.
Connect a grease gun to each fitting
and
Figure
33).
5.
Pump grease into the fittings until grease begins
to ooze out of the bearings (approximately 3
pumps).
6.
Wipe up any excess grease.
29
(Figure 32
Figure 32
Figure 33
g005555
g004209
Advertisement
Table of Contents
