1-1-10
Starting (On) operation of selected R.C.Group / Group
Monitor Mode (Icon)
1-1-11
Stopping (Off) operation of selected R.C.Groups / Groups
Monitor Mode (Icon)
1-1-12
Expanding the name display of R.C.Group / Group
Monitor Mode (List)
1-1-13
Checking the error list when an error occurs
Monitor Mode (Icon) / Error List
En-10
● Select the relevant R.C.Groups / Groups from
R.C.Group / Group on "Monitor Mode" screen.
The R.C.Groups / Groups become the selected state
(blue).
Click "On" button.
a
The indoor units start to operate under the preset con-
ditions.
1
Note
When a password is set at "Operating Setting", the pass-
word must be input.
Select the relevant R.C.Groups / Groups from
R.C.Group / Group operating on "Monitor Mode"
screen.
The R.C.Groups / Groups become the selected state
(blue).
Click "Off" button.
a
Operation of the selected R.C.Groups / Groups stops.
Note
1
When a password is set "Operating Setting", the pass-
word must be input.
● When the name of the R.C.Group / Group is longer
than the display area on "List" screen, expand the
display frame to display the entire name.
1
Click "Expand" button.
a
The name display frame is expanded and the entire
●
name is displayed.
To return the display to its original state, click "Reduce"
button.
When an error occurs, "Error List" window opens at
a
the bottom of monitor mode screen.
Note
The 3 items "Name", "Address", and "Error Code" are
displayed in "Error List" window. The items are displayed
in both "Icon" Display and "List" Display. However, if
there is not even 1 error, "Error List" window is not dis-
played.
1