Changing The Registered Indoor Units Sequence - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

Installer Setting (Indoor Unit Registration)
Confi rmation Screen
Installer Setting (Indoor Unit Registration)
3-6-8

Changing the registered indoor units sequence

Installer Setting (Indoor Unit Registration) Addition/Deletion
The remote controller groups in the order in which they

were started are displayed on "Indoor Unit Registration
List" screen.
6
At the end of "Register by operation order", click "Reg-
f
istration End" button.
Click "OK" button to close the slave window.
g
Click "Close" button to determine the set contents.
h
"Installer Setting" screen opens.

Note
Registration is possible even when shifted from an op-
eration other than operation registration.
7
8
When you want to change the indoor unit sequence,
a
1
click the relevant indoor unit.
Display of the selected names becomes blue.

Scroll using "Up" and "Down" buttons.
b
At the end, click "Close" button.
c
2
"Installer Setting" screen opens.

Notice
3
When setting a remote controller group, only the master
indoor unit can be selected. Slave units always shift as a
set with the master unit.
En-31