Setting Operation On/Off; Setting The Operation Mode; Setting The Temperature - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

2-1-2

Setting operation On/Off

Operation Setting
2-1-3

Setting the operation mode

Operation Setting
2-1-4

Setting the temperature

Operation Setting
Note
The heating set temperature range of
10°C to 15°C (48°F to 58°F) may not be
settable, depending on the indoor unit
model.
Click "On" button.
a
Operation start setting of the selected (blue) indoor
●
units is performed. When "Off" button is clicked, op-
eration stop setting is performed.
1
Click "OK" button.
b
The set contents are executed.

Note
When "" button at "Control Unit" on "Operation Setting"
2
screen is clicked, selected R.C.Group / Group is dis-
played (When two or more "R.C.Group" and "Group" are
selected, the operation can be performed.).
Click the mode button to be selected.
a
Note
When the function does not exist at the objective unit,
setting cannot be selected.
1
Buttons with their operation prohibited cannot be clicked.
Note
When "Operation Controlled" is displayed, there is no
cooling and heating selection right.
Select the set temperature using "" button" and ""
a
button. Check the set temperature at the display sec-
tion.
Note
1
When the "" button or "" button is pressed, Celsius
display increases and decreases in 0.5°C steps and
Fahrenheit display increases and decreases in 1°F
steps.
Notes
Here, the settable temperature range is different for each
operation mode.
For the settable temperature ranges, see "Setting set-
table temperature range".
Temperature unit
Set temperature
(Auto, Cool, Dry)
Set temperature
(Heat)
Celsius (°C) Fahrenheit (°F)
18°C-30°C 64°F - 88°F
10°C-30°C 48°F - 88°F
En-13