Exporting Indoor Unit Registration Data; Registering The Electricity Meter - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

Importing from external memory is complete.
3-6-12

Exporting indoor unit registration data

Installer Setting (Unit Registration)
Exporting Data
"Exporting to external memory is complete."
3-6-13

Registering the Electricity Meter

Installer Setting (Unit Registration)
En-34
Click "Close" button.
e
Pull out the external memory from the USB terminal.
●
Note
When the "Close" button is clicked, whether or not the
5
indoor unit which is importing data is in the system is
automatically checked.
● Connect the USB memory to which the indoor unit reg-
istration data is to be stored to the terminal.
Click "Select" button of "Export registered data to exter-
a
nal memory".
The message "Exporting data" appears on the screen.

 At the end of exporting, the message screen disap-
pears.
1
"Exporting to external memory is complete." screen

opens.
Click "Close" button.
b
Pull out the USB memory from the terminal.
●
Notice
The data is saved under the following name in the USB
directory. In + date + time
Example: In0901011200
2
2009/01/01/12:00
Click "Select" button on "Register by manual setting".
a
"Unit Registration" screen opens.

Note
The "Installer Setting (Unit Registration)" screen is the
1
same as the "Installer Setting (Unit Registration) Addi-
tion/Deletion" screen which is opened when the "Select"
button was clicked at step [1] of 3-6-7.