Pioneer XC-L7 Operating Instructions Manual page 15

DIRECT PLY
(OenSiay
©
@ move:
ROM OTE CONTROL WaT
@ This clock provides a 24-hour display.
@ The remote contro! unit cannot be used to set the
clock.
Example: To set the clock to 10:30 (A.M.}, April 18,
1997.
Press the CHARACTER/Timer button.
2. Use the [J] and [-] buttons to select
"CLOCK ADJUST",
3. Press the SET button.
Use the [eJ and £s] buttons to set the day
to "18."
5. Press the SET button.
Use the [J and (-] buttons to set the
month to "4,"
Press the SET button.
Use the EJ and [-] buttons to set the year
to "97."
9. Press the SET button.
10. Use the [J and fe] buttons to set the hour
to "10."
11. Press the SET button.
12. Use the [-] and £-] buttons to set the
minutes to "30."
13. To start the clock operation, press the SET
button.
® To set the clock most accurately, it is recommended
to use your local telephone service's time signal.
NOTES:
@ The timer functions will not operate if the clock has
not been set properly to the current time.
@ /f the power source is disconnected or interrupted,
the clock display will flash, to indicate that the cor-
rect time is no longer set. in this event, reset the
clock to the correct current time.
@ While playing components using the various func-
tions, the remote control unit's DISPLAY button can
be pressed to display the current clock time.
@® The year can be set within the range 1997-2030.
En <ARB7126> ©