Huawei EchoLife HG8110 Service Manual page 316

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
l
Issue 02 (2011-12-08)
Parameter
Service List
VLAN ID
802.1p
IP Acquisition Mode
NAT
Vendor ID
Binding options
WAN Configuration - bridge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Web Page Reference
Description
Indicates the service type of the WAN
interface. It can be set to TR069,
INTERNET, TR069_INTERNET, VOIP,
TR069_VOIP, VOIP_INTERNET, or
TR069_VOIP_INTERNET.
Indicates the VLAN ID. It ranges from 1 to
4094.
The VLAN ID must be the same as the
CVLAN ID on the OLT.
Indicates the 802.1p value. It ranges from
0 to 7.
Indicates the mode of obtaining an IP
address on the ONT. It can be set to DHCP,
static, or PPPoE.
l In DHCP mode, the IP address is
dynamically obtained.
l In static mode, the IP address is set
statically. You need to enter the IP
address, subnet mask, IP addresses of
the active and standby DNS servers,
and default gateway.
l In PPPoE mode, you need to enter the
user name and password.
Indicates whether to enable the NAT
function.
Set the option 60 field on the DHCP client.
The IP address can be obtained from the
DHCP server only when the option 60 field
is the same as the setting on the upper-layer
DHCP server. When IP Acquisition
Mode is set to DHCP, this parameter is
configurable.
Used to bind the WAN interface to the
LAN port or to the wireless SSID.
NOTE
Before setting the binding options, set the work
mode of the LAN port or the wireless SSID. The
binding options can be set only after the work
mode or wireless SSID is successfully set. For
details, see 5.3.1 LAN Port Work Mode
5.4.1 WLAN Configuration.
and
308