EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5.6.2 Static Route Configuration
1.
Figure 5-23 Static Route Configuration
2.
Table 5-8
Table 5-8 Parameters related to the static route
Parameter
Destination Network
Address
Subnet Mask
Gateway IP Address
Interface
5.6.3 Policy Route Configuration
1.
Issue 02 (2011-12-08)
In the navigation tree on the left, choose Route > Static Route Configuration. In the pane
on the right, click New. In the dialog box that is displayed, set the parameters related to the
static route, as shown in
Click Apply to apply the configuration.
describes the parameters related to the static route.
In the navigation tree on the left, choose Route > Policy Route Configuration. In the pane
on the right, click New. In the dialog box that is displayed, set the parameters related to the
policy route, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-23.
Description
Indicates the destination IP address of the static route.
Indicates the subnet mask of the static route.
Indicates the gateway IP address of the static route.
Indicates the WAN interface that the route travels through.
Figure
5-24.
5 Web Page Reference
323