Porttrigger Configuration - Huawei EchoLife HG8110 Service Manual

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
the Intranet host IP address and port ID to Extranet IP address and corresponding port ID so that
users from Extranets can access the Intranet server. With port mapping, the users cannot see the
Intranet IP address and they see the Extranet IP address.
Table 5-10
Table 5-10 Parameters related to port mapping
Parameter
Interface
Protocol
External Start Port
External End Port
Internal Start Port
Internal End Port
External Source Start Port
External Source End Port
Internal Host
External Source IP
Address
Mapping Name
Enable PortMapping

5.7.3 PortTrigger Configuration

1.
Issue 02 (2011-12-08)
describes the parameters related to port mapping.
In the navigation tree on the left, choose Forward Rules > PortTrigger Configuration.
In the pane on the right, click New. In the dialog box that is displayed, set the parameters
related to the port trigger, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Indicates the name of the WAN interface where port mapping is
enabled.
Indicates the protocol type of port mapping packet, which may
be TCP, UDP, or TCP/UDP.
Indicates the destination start port of the external data packet.
Indicates the destination end port of the external data packet.
Indicates the internal destination start port of the port mapping
packet.
Indicates the internal destination end port of the port mapping
packet.
Indicates the source start port of the external data packet.
Indicates the source end port of the external data packet.
Indicates the IP address of the host to which the port is mapped.
Indicates the source IP address of the external data packet.
Indicates the name of the port mapping rule.
Indicates whether to enable port mapping.
Figure 5-27.
5 Web Page Reference
326