Kenwood TS-790A Instruction Manual page 13

Note:
The IF SHIFT contrat does not function in the FM
mode.
Turned counterclockwise Turned clockwise
iF filter passband
Ge characteristic =
® ®
/ Signal
Signat Signal
0 Interfering signai O Interfering signal 9
RIT —@— IF SHIFT RIT —@— IF SHIFT RIT —@- IF SHIFT
KES (ER (PS
Oy
Aes
Or
|
Turn the knob counterciock- Turn the knob clockwise to |
wise to eliminate interference eliminate interference fram sig- |
fram signal ®. nal @.
IF SHIFT operation
@) MHz switch
This switch is used to determine if the TUNING knob
will shift the frequency in 1 MHz steps. When the 1
MHz step position is selected, the MHz indicator will
light.
@) BAND switch
Used to select a amateur radio frequency band. When
MAIN and SUB bands are equal, the SUB display will
read ''QFF''.
TUNING knob (VFO)
Rotate the knob to select the desired frequency. Fast
tuning is possible by rotating the knob rapidly. This
knob may also be used to select the desired memory
channel. The dial drag is adjustable by holding the out-
side knob and turning the inside knob clockwise to in-
crease drag, and counterclockwise to decrease drag.
13