Kenwood TS-790A Instruction Manual page 17

B. SUB RX Display Panel
MODE display
M.CH display
CO display
SCAN display
VFO A/B display
STEP display
@ ®@ ©® © ©O
¢
oe
: Indicates the selected mode.
:Turns ON during Memory
Channel operation.
: Turns ON during Carrier Oper-
ate scan operation.
: Turns ON during scanning.
: Turns ON when VFO A {or
VFO B) is active.
: Lights when the STEP key is
ON.
CTCSS (Continuous Tone Coded Squeich System)
display (TS-790A only)
Frequency display:
@) S-meter
@ display
: Turns on to indicate the
CTCSS function is active.
Indicates the operating fre-
quency.
: During receive the meter is
used as an S-meter.
: The @ display indicates the
Memory Channel! currently
display will be skipped during
Memory Channel scan.
(Please refer to Section
4-5-3.)
@ 6) i @)
Pe SCAN A VFO B STEP
(REG EEaE
ITE SETTLE ATE
+20 +40 dB
(3) MHz display
(2) M.SCR display
(73) Memory Channel
number display
CTCSS
: Turns on to indicate the MHz
function is active.
: Lights when the M.IN key is
pressed.
: Memory Channel Number is
displayed.
V7