Kenwood TS-790A Instruction Manual page 40

Channel will be the highest operating frequency.
4-4-10. Memory Channel Selection
A. To selact a memory channel
4. During VFO operation, press the VFO/M key to ini-
tiate Memory Channel operation.
2. Turn ON the MHz switch (the MHz indicator lights)
and press the microphone UP/DOWN switch; to
select the desired memory channel.
3.To return to normal VFO operations press the
VFO/M key.
B. To change to an open channel.
1. During VFO operation, press the VFO/M key to ini-
tiate Memory Channel operation.
2. Press the M.IN switch (the M.SCR indicator lights)
and press the microphone UP/DOWN switch; an
open channel will be selected.
3. To return to normal VFO operations press the
CLEAR key and press the VFO/M key.
4-4-11. Clearing a Memory Channel
To erase a specific Memory Channel:
Press and hold the CLEAR key for approximately 2
seconds or transfer data from an empty Memory
Channel to the Memory Channel you wish to clear.
(Please refer to Section 4-4-9 for additional infor-
mation.)