Operation check
The following shows the writing procedure of parameters to MES interface module and checking procedure of the writing
result to a DB table.
Writing procedure of parameters to MES interface module
1.
Select [Online] [Write to MES Interface Module] in
MES Interface Function Configuration Tool.
2.
When the "Specify Connection Destination" screen
appears, enter a user name and password, then click
the [OK] button.
The following are set by default.
User Name: RD81MES96
Password: MITSUBISHI
3.
After completing the writing, reset the CPU module and
start MES interface module.
After resetting the CPU module, turn the status to RUN.
4.
The parameters are written to the database
automatically after starting MES interface module.
8.5 MES Interface Function Setting
8 OPERATION EXAMPLE
113
8