Parameter Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

Parameter setting

The mode settings, module operations forced change settings, target device response monitoring time settings, and module
READY signal delay time settings for an MES interface module can be configured in the parameter setting of an engineering
tool.
For details on the parameter setting, refer to the following:
MELSEC iQ-R MES Interface Module User's Manual (Application)
• CW Configurator is not supported.
Startup method
Operating procedure
Start GX Works3 from "MELSOFT" in Windows Start.
Parameter setting
Operating procedure
1.
Create a new project.
Select [Project]  [New] from the menu.
2.
Select an item for each "Series", "Type", and "Program Language", and click the [OK] button.
3.
Set whether to use module labels and sample comments, and click the [OK] button.
4.
Display the "Add New Module" screen.
[Navigation window]  [Parameter]  [Module Information]  right-click  [Add New Module]
4.2 Starting an MES Interface Module and Configuration Personal Computer
4 PROCEDURE BEFORE OPERATION
4
67