Chapter 2 Specifications; Performance Specifications; Hardware Specifications - Mitsubishi Electric MELSEC iQ-R Series User Manual

2
SPECIFICATIONS
This chapter explains the specifications of an MES interface module.
2.1

Performance Specifications

This section shows the performance specifications of hardware (MES interface module) and software (MX MESInterface-R).

Hardware specifications

The following table shows the specifications of an MES interface module.
Item
SD memory card slot
Ethernet port
Number of occupied I/O points
Clock
5 VDC internal current consumption
External dimensions
Weight
*1 1000BASE-T/100BASE-TX/10BASE-T, and full-duplex/half-duplex communication mode are identified by an MES interface module
depending on the hub.
For connection with a hub not having the auto-negotiation function, set the setting on the hub side according to the communication
mode.
*2 For a switching hub, consult the manufacturer of the hub used.
*3 For the maximum segment length (length between hubs), consult the manufacturer of the switching hub used.
2 SPECIFICATIONS
18
2.1 Performance Specifications
Interface
Power supply
Number of channels
*1
Interface
Data transmission 1000BASE-T
speed
100BASE-TX
10BASE-T
Number of cascade 1000BASE-T
*2
connections
100BASE-TX
(When using a
10BASE-T
repeater hub)
Communication mode
Transmission method
*3
Maximum segment length
Applicable connector for external wiring
Supported function
Height
Width
Depth
Specification
SD memory card/SDHC memory card (2 GB to 16 GB)
+3.3 VDC, up to 200 mA
2
• 1000BASE-T
• 100BASE-TX
• 10BASE-T
1 Gbps
100 Mbps
10 Mbps
Consult the manufacturer of the repeater hub used.
2 levels maximum
4 levels maximum
Full-duplex/half-duplex
Base band
100 m (length between a hub and a node)
RJ45
• Auto-negotiation (automatic recognition of 1000BASE-T/100BASE-TX/10BASE-T)
• Auto-MDI/MDI-X (automatic recognition of a straight/crossover cable)
32 points/slot (I/O assignment: Intelligent function module 32 points)
Acquired from a CPU module (CPU No.1 in a multiple CPU system).
Page 19 Basic operation specification
1.25 A
106 mm
27.8 mm
110 mm
0.25 kg