Selecting The Correct Inverse Assembler - HP 10343B Operating Manual

Selecting the
Correct Inverse
Assembler
The
HP
10343B has ten inverse assemblers available for
SCSI
Bus system
analysis.
The interpretation of the
SCSI
command sets vary in each
inverse assembler to match the applications of various device types. Only
one inverse assembler can be used at a time.
Note
If you do not want to lose your current data, you must save your
data before loading a different inverse assembler into the logic
analyzer.
The inverse assemblers available are:
• ISCSIDIR
• ISCSISEQ
• ISCSIPTR
• ISCSIPRC
• ISCSISCN
• ISCSIDSE
• ISCSIAMC
• ISCSICOM
• ISCSIWRM
• ISCSIOPT
ISCSIDIR - Is for Direct Access Devices and Read Only Direct Access
Devices.
ISCSISEQ - Is for Sequential Devices like tape backup drives.
ISCSIPTR - Is for Printers.
ISCSIPRC - Is for Processor Devices.
ISCSISCN - Is for Scanner Devices.
SCSI Bus Preprocessing
2-16