Table of Contents
Advertisement
2.3.2
Installation for Microsoft Windows NT & '95 Systems
1.
Insert the diskette into the diskette drive of the PC.
2.
Select the "Run" option from the pop-up, "Start" menu and type the following command line;
A:\SETUP.EXE
3.
Proceed with the installation, following the instructions displayed on the screen.
2.4
RSS Programming Options
The TRICK RSS main screen is shown in Figure 1-7 below. The programming options provided
under the pull-down menus are described in the following paragraphs.
File Menu
Ref: para. 2.4.1
Setup Menu
Ref: para. 2.4.2
Configuration Menu
Ref: para. 2.4.3
View Menu
Ref: para. 2.4.4
About TRICK Menu
Ref: para. 2.4.5
2.4.1
File Menu
The following options are available from the File Menu:
Open - used to load a personality file from disk.
Save - used to save the current open personality file to disk.
Save As - used to save the current open personality file to disk (with the option of changing the
name of the saved file).
Read Device - used to read personality data from the TRICK via the RIB connected to the selected
COM port.
Write Device - used to write the personality data from the PC to the TRICK via the RIB.
Installation and Programming Guide
Figure 1-7 TRICK RSS Main Screen
Programming the TRICK
Toolbar
Status Bar
1-9
Advertisement
Table of Contents
