Table of Contents
Advertisement
RSS Language Selection
The final option on the configuration menu is "Languages".
If this option is selected, a screen listing the languages supported by the RSS is displayed. The
required language is selected by clicking on the appropriate check button.
ie. if French is required;
¡
¤
¡
¡
¡
2.4.4
View Menu
The following options are available from the View Menu:
Toolbar
Status Bar
This menu is used to select which of the screen display components are required. If selected, the
item is marked with a "
2.4.5
About TRICK Menu
When selected, the About TRICK Menu simply displays the version number of the RSS.
2.5
TRICK RSS Operation
The TRICK is programmed using the RSS package EVN4008 installed on a PC as previously
described in this guide. To program the TRICK proceed as follows:
1.
Connect the PC to the TRICK using a standard Motorola Radio Interface Box (RIB)
(Part No. RLN4008).
2.
Connect the RIB to the PC using the RIB/PC cable (Part No 3080369B72).
3.
Connect the RIB to the front panel connector of the TRICK using the RIB/TRICK cable
(Part No RLN4008). Note that the POWER ON LED starts to flash.
4.
Start the TRICK RSS and read the existing programming information from the TRICK using
the "Read Device" option from the pull-down "File" menu.
5.
Work through the RSS screens and options as previously described.
6.
When the required configuration has been set up, write the new programming information to
the TRICK using the "Write Device" option from the pull-down "File" menu.
Installation and Programming Guide
English
French
German
Spanish
Italian
" symbol.
Programming the TRICK
1-15
Advertisement
Table of Contents
