Table of Contents
Advertisement
Tone acknowledge on TRC commands - enable/disable audible acknowledgment tones
generated in response to TRC commands received from the wireline
Timers
Line fail check period (s) - defines period during which the TRICK expects to receive
TRC commands from the wireline. If TRC command is not received during this period, it is
assumed that the line has failed
PTT max time (s) - defines maximum wireline console TX key time
PTT block time (s) - defines minimum delay between wireline console TX dekey
and TX key
Single Tones - defines frequencies assigned to the select V single tones A, B, C and D
TRC Setup
May assign one of the following commands to each of the function tones F1 to F15;
MON
RPT SETUP
RPT KNOCK DOWN
CHN1 KEY
CHN2 KEY
CHN3 KEY
CHN4 KEY
CHN5 KEY
CHN6 KEY
CHN7 KEY
CHN8 KEY
WC1 ON
WC1 OFF
WC2 ON
WC2 OFF
RPT ENABLE
LINE TEST
A separate menu box is provided to set the guard tone frequency
Installation and Programming Guide
Table 1-7 Commands for TRC Set Up
Command Name
Command Description
monitor
repeater set up
repeater knock-down
channel 1 / PTT
channel 2 / PTT
channel 3 / PTT
channel 4 / PTT
channel 5 / PTT
channel 6 / PTT
channel 7 / PTT
channel 8 / PTT
wildcard 1 on
wildcard 1 off
wildcard 2 on
wildcard 2 off
repeater enable
line test tone (see LFTT)
Programming the TRICK
1-13
Advertisement
Table of Contents
