Table of Contents
Advertisement
6.
Select the "GP I/O lines" option from the pull-down "edit" menu and configure the radio
as follows;
I/O assignment = free format
GP3
GP6
RX audio = filtered (unsquelched)
7.
Select the "OK" button.
8.
Write the new programming information to the radio using the "write radio" option
from the pull-down "file" menu.
Tx Radio
9.
Use the PROGRAM button on the front panel of the TRICK to select the TX radio as the
target device. Note that the TX LED is lit.
10. Start the GM350 RSS package and read the radio using the "read radio" option from the
pull-down "file" menu.
11. Select the "per channel" option from the pull-down "edit" menu and configure the eight
channels with the appropriate frequency, PL and power settings.
12. Select the "per channel" option from the pull-down "edit" menu and configure the
eight channels with the appropriate frequency, PL and power settings.
13. Select the "OK" button.
14. Select the "GP I/O lines" option from the pull-down "edit" menu and configure the radio
as follows;
I/O assignment = free format
GP1
15. Select the "OK" button.
16. Write the new programming information to the radio using the "write radio" option from the
pull-down "file" menu.
Installation and Programming Guide
PL/DPL detect
low
HOOK
low
PTT voice
low
pin 8
pin 14
pin 3
Programming the Radios
1-17
Advertisement
Table of Contents
