UPS5000-H-600 kVA-FT(M)
User Manual (FusionPower6000)
Figure 4-2 Preparing a cable terminal outside the cabinet
Step 4 Connect the cable with a crimped terminal to the corresponding copper bar.
Step 5 Clear sundries inside the cabinet.
----End
4.4 Verifying the Installation
You need to carefully check items 08 to 12 listed in the table. Otherwise, the UPS
may be damaged.
Table 4-1 Checklist
No.
01
02
03
04
05
Issue 02 (2024-01-05)
NO TE
Choose an appropriate cabling route based on the actual situation. The figure is for
reference only.
CA UTION
Check Item
Cabinet installation
Neat arrangement
Layout of the busway and
cables
Labels on the busway and
cables
Cable ties
Copyright © Huawei Digital Power Technologies Co., Ltd.
Acceptance Criteria
The cabinets are securely installed and
do not tilt due to vibration.
The UPS and its adjacent cabinets are
neatly arranged and secured with
connecting kits.
The busway and cables are routed
properly as required by the customer.
Both ends of a busway and cable are
labeled. Labels are concise and easy to
understand.
Distances between cable ties are the
same, and no burr exists.
4 Installation
68