High Resolution Analog Input Parameter; Parameter List - Mitsubishi Electric 800 Series Instruction Manual

5.3

High resolution analog input parameter

5.3.1

Parameter list

Use the following parameters for high resolution analog input.
Pr. Pr. group
*1*2
T060 High resolution analog input selection
406
846 G236 Torque bias balance compensation
847 G237 Fall-time torque bias terminal 1 bias
848 G238 Fall-time torque bias terminal 1 gain
*3
T680 Terminal 6 bias frequency (speed)
C30(926)
*3 T681 Terminal 6 bias (speed)
C31(926)
*3
T682 Terminal 6 gain frequency (speed)
C32(927)
*3
T683 Terminal 6 gain (speed)
C33(927)
*3
T684 Terminal 6 bias command (torque)
C34(928)
*3
T685 Terminal 6 bias (torque)
C35(928)
*3
T686 Terminal 6 gain command (torque)
C36(929)
*3
T687 Terminal 6 gain (torque)
C37(929)
*1 Setting can be made only when the FR-A8AZ is mounted.
*2 For Pr.406, write is disabled during operation even when "2" is set in Pr.77. When changing the parameter setting, stop the operation.
*3 The parameter number in parentheses is the one for use with the LCD operation panel and the parameter unit.
*4 Differs according to types. (FM type/CA type)
Name Setting range
0, 2 to 6, 9999
0 to 10 V, 9999
0 to 400%, 9999
0 to 400%, 9999
0 to 590 Hz
0 to 300%
0 to 590 Hz
0 to 300%
0 to 400%
0 to 300%
0 to 400%
0 to 300%
Minimum
setting Initial value
increments
1 9999
0.1 V 9999
1% 9999
1% 9999
0.01 Hz 0 Hz
0.1% 0%
0.01 Hz
60 Hz/50 Hz
0.1% 100%
0.1% 0%
0.1% 0%
0.1% 150%
0.1% 100%
HIGH RESOLUTION ANALOG INPUT
*4
5
29