Destroying A Virtual Library - HP 12000 User Manual

Figure 23 Create Virtual Library Wizard window (10 of 12)
9. Click Next Step.
A summary window opens and displays details about the cartridges you created.
10. Click Next.
1 1. Click Return.
The System tab window opens. You can now select the new library, tape drives, and cartridges
in the navigation tree to view their configuration information, such as their default LUN numbers.

Destroying a Virtual Library

NOTE: Destroying a virtual library may create a gap in the default LUN numbering on the Fibre
Channel host port to which it was mapped. If a gap is created, restart the VLS device emulations
to remove the gap. See
Most operating systems will ignore (cannot access) any virtual devices with LUN numbers that
follow a gap in the LUN numbering on an Fibre Channel host port.
NOTE: You cannot destroy a library that is currently being accessed by a backup application.
When a virtual library is destroyed, all the tape drives associated with the library are also destroyed.
The cartridges in the virtual library, however, are not destroyed. They are moved to the Firesafe
where they are stored until you either destroy them or associate them with a virtual library. See
"Managing Cartridges" (page
To destroy (delete) a virtual library, from Command View VLS:
1. Click the System tab.
2. Select the virtual library in the navigation tree.
The virtual library details window opens.
3. Click Destroy Virtual Library in the task bar.
4. Click Yes to confirm.
5. Click Finish.
"Restarting VLS Device Emulations" (page
105).
109).
Destroying a Virtual Library 101