Unmanaging A San Or Lan/Wan Library - HP 12000 User Manual
Hp 12200 gateway virtual library system user guide (bw403-10001, june 2011)
Hide thumbs
Also See for 12000:
- User manual (266 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
1.
Select the Automigration/Replication tab.
The Summary for All Managed Destination Libraries screen displays.
2.
Select Manage LAN/WAN Replication Library from the task bar.
3.
Enter the name or IP address of the host containing the LAN/WAN replication target you just
created.
4.
Select Submit.
5.
On the next screen, select the LAN/WAN replication target to manage.
6.
Enter the password you created for that target.
7.
Select Submit.
The LAN/WAN replication target is now associated with the source.
You must re-manage a LAN/WAN replication target if you change the password for security
reasons. To re-manage a LAN/WAN replication target:
1.
Select the Automigration/Replication tab.
2.
Expand Destination Libraries in the navigation tree.
3.
Select the library of interest to open the Destination Library Details screen.
4.
From the task bar, select Re-manage LAN/WAN Replication Target.
5.
Enter the host name of the LAN/WAN replication target only if the LAN/WAN replication
target's host name has changed.
6.
Enter the LAN/WAN replication target password.
7.
Select Submit.
The LAN/WAN replication target is now re-managed with the source using the new password.
You can now create pools for the library and manage your data on the library using replication.
You can also unmanage the library at any time. See
Library" (page 38)
Unmanaging a SAN or LAN/WAN Library
Use one of the following two ways to unmanage a library:
Unmanage a library from the Destination Library Details window.
1.
From the navigation tree, select the specific library to unmanage.
NOTE:
libraries, repeat the procedure for each library to unmanage.
2.
Select Unmanage from the task bar.
3.
Select OK from the dialog box.
The Destination Libraries window displays and provides the message, "The library, [library
name], was unmanaged successfully."
Unmanage the library from the Destination Libraries window.
1.
Select Destination Libraries from the navigation tree.
2.
From the task bar, select Unmanage Library.
The Unmanage Destination Library screen displays, showing all managed libraries. If there
are no managed libraries, the system will return the message: "There are no managed
libraries".
3.
If the library you wish to unmanage is not already selected, select it now.
38
Automigration/Replication
for instructions.
You can only select one library to unmanage at a time. To unmanage additional
"Unmanaging a SAN or LAN/WAN
Advertisement
Table of Contents
