Monitoring Commands - HP 12000 User Manual

Table 18 CLI Management Commands
Command
changePassword
editCartridge
restartEmulations
restartCommandViewVLS
restartSystem
shutdownSystem
shutdownNode
saveAllConfig
restoreAllConfig
1 <s> = string; <n> = number; <f> = filename

Monitoring Commands

Use the CLI commands in
View the VLS health status
View or delete notification alerts
Add, view, or delete E-mail servers to route notification alerts
Add, view, or delete E-mail addresses for notification alerts
Add, view, or delete SNMP management consoles to receive notification alerts
1
Usage
Resets the administrative password, or changes the administrative or user password.
Command View VLS automatically restarts after changing the passwords to make the
changes take effect. Where the options are:
-admin - Reset the administrator password ( -u and -p are ignored) (optional)
-p - Password (no spaces) (optional)
-u - Username (administrator or user). Default is current user. (optional)
-h - Displays command usage information (optional)
Changes parameters on an existing cartridge. Where the options are:
-a <s> - VLS filename of the cartridge (required)
-b <s> - Barcode label of the cartridge (required)
-c <n> - Current capacity of the cartridge in gigabytes (optional). Only required if
changing the cartridge capacity.
-l <s> - Name of library in which the cartridge resides (Library_0, ...) (required)
-nc <n> - Desired new capacity of the cartridge in gigabytes (optional)
-nl <s> - Name of the new library if moving cartridge (Library_1, ..) (optional)
-s<s> - Storage LUN name (SLun_#) (required)
-w - Write protect? (0-read/write or 1-read only) (optional)
-y <n> - Cartridge emulation type (2, 3, ...) (required)
-h - Displays command usage information (optional)
Restarts the VLS device emulations.
Restarts Command View VLS.
Shuts down and restarts the VLS node.
Shuts down the VLS node so it can be powered off.
Shuts down the VLS node so it can be powered off.
Where the options are:
-o <s> - Saves the VLS virtual library configuration and network settings to the specified
external configuration file.
-h - Displays command usage information (optional)
Where the options are:
-in <s> - Restores the VLS virtual library configuration and network settings from the
specified external configuration file.
-h - Displays command usage information (optional)
CLI monitoring commands to:
VLS Commands 143