HP 12000 User Manual page 25

b. From the Storage tab navigation tree, select the EVA storage system that will be used for
the VLS Gateway, then Hosts.
c. In the status pane, click Add Host to display the Add a Host screen.
d. Enter the Host name (preferably the VLS hostname), enter or select one of the WWPNs
(noted in the previous step) in the Port WW Name box on the VLS Gateway, and select
Linux for the Host OS
NOTE: If a WWPN is not in the Port WW Name box, there may be a zoning error.
After creating the host entries, verify that your zoning is correctly configured.
Figure 3 Add a Host window
e. Click on Add Host.
f. From the Storage tab navigation tree, select the host you just added.
g. Click on the Ports tab in the status pane.
h. Click on Add port, select one of the VLS Gateway WWPNs (noted in the previous step)
from the pull-down list or type one of the appropriate WWPNs, then click Add port
(Figure 4 (page 25)).
Figure 4 Add a Host Port window
(Figure 3 (page 25)).
Establishing Communication Between the VLS12200 Gateway and the EVA 25