Assigning A Unit To A Site, Location, Or Folder - Dell PowerEdge 180AS User Manual

2 Click the Folders node and select File - New - Folder.
-or-
Right-click the Folders node and select New Folder. The New Folder
dialog box appears.
3 Type a name for the folder from 1 to 32 characters long. Folder names are
not case sensitive and can consist of any combination of characters entered
from the keyboard. Spaces are permitted in the middle but leading and
trailing spaces are not allowed. Duplicate folder names are not allowed at
the same level but are allowed across different levels.
4 Click OK. The new folder appears in the Group Selector pane.

Assigning a Unit to a Site, Location, or Folder

You can assign a Remote Console Switch or server to a Site, Department,
Location or Folder in the Remote Console Switch Software. This menu item
is only enabled when a single Remote Console Switch or server is selected in
the Unit Selector pane. These custom targets are defined in the General
Properties dialog box.
To assign a unit to a site, location, or folder:
1 Select a unit in the Unit Selector pane in the Remote Console Switch
Software.
2 Select Edit - Assign from the Explorer menu.
-or-
Click the Assign To task button.
-or-
Right-click a unit and select Assign To. The Assign To dialog box appears.
Figure 4-20. Assign To Dialog Box
Remote Console Switch Software Basic Operations
96