Dell PowerEdge 180AS User Manual page 136

Accessing Scan Mode from the Remote Console Switch Software
Figure 5-11. Remote Console Switch Software- Scanning Servers
To access the Scan mode in the Remote Console Switch Software:
1 In the Remote Console Switch Software Explorer, select the Servers, Sites
or Folders tab.
2 Select two or more servers in the Unit Selector pane by pressing the
<Shift> key.
-or-
Press the <Ctrl> key. The Scan Mode task button appears.
3 Click the Scan Mode task button. The Thumbnail Viewer window
appears.
119
Using the Viewer