Dell PowerEdge 180AS User Manual page 90

Figure 4-5. Configure Tiered Switches Dialog Box
10 When complete, click Finish to exit the Wizard and return to the main
window. Your Remote Console Switch should now be in the Unit Selector
pane.
To discover a Remote Console Switch:
1 Select Tools - Discover from the Explorer menu from the Remote Console
Switch Software. The Discover Wizard appears. Click Next to continue.
2 The Address Range page appears. Complete one of the following steps:
If you are using IPv4 mode, select Use IPv4 address range, and type the
range of IP addresses you wish to search on the network in the To Address
and From Address boxes. Use the IP address dot notation xxx.xxx.xxx.xxx.
-or-
If you are using IPv6 mode, select Use IPv6 subnet, and specify the IPv6
network prefix.
3 You may also change the default HTTP and HTTPS port numbers, if the
Remote Console Switch has changed from the default on the serial
console, by typing the new port numbers in the HTTP Port and HTTPS
Port fields. Click Next to continue.
73
Remote Console Switch Software Basic Operations