Dell PowerEdge 180AS User Manual page 269

3 Click SIP to view individual SIP module version information. The SIP
Select dialog box displays.
4 Select a SIP module to upgrade and click the Version button. The SIP
Version dialog box displays.
5 Click the Load Firmware button. The SIP Load dialog box displays.
6 Click OK to initiate the upgrade and return to the Status dialog box.
NOTE:
During an upgrade, the SIP status indicator in the Main dialog box is yellow.
The SIP module is unavailable while an upgrade is in progress. When an upgrade is
initiated, any current connection to the server via the SIP module is terminated.
NOTE:
If you wish to return a SIP to its factory settings, click SIP in the Version
dialog box. The SIP Version dialog box displays. Click Decommission and then OK to
restore factory defaults to the SIP.
Appendix E: FLASH Upgrades
252