Remote Console Switch Installation And Setup; Getting Started - Dell PowerEdge 180AS User Manual

10 Adjust the resolution (select View - Manual Scale) and quality (select
Tools - Manual Video Adjust) of the server video in the Viewer.

Remote Console Switch Installation and Setup

The Remote Console Switch system uses Ethernet networking infrastructure
and TCP/IP protocol to transmit keyboard, video, and mouse information
between operators and connected computers. Although 10BaseT Ethernet or
Gigabit may be used, Dell recommends a dedicated, switched 100BaseT
network.

Getting Started

Before installing your Remote Console Switch, refer to the list below to
ensure you have all items that shipped with the Remote Console Switch, as
well as other items necessary for proper installation.
Supplied with the Remote Console Switch:
• Remote Console Switch unit
• Local country power cord
• 0U mounting bracket
• 1U mounting bracket
• 1U mounting bracket hardware kit
• Serial cable
• Cat5 cable
• Remote Console Switch System User's Guide on CD
• Installation Instructions
• Safety booklet
• Regulatory booklet
Additional items needed:
• One Dell SIP or Avocent IQ module per attached device
• One CAT 5 patch cable per attached device (up to 30 meters)
Optional items:
• Front Access Panel
Installation
10