Dell PowerEdge 180AS User Manual page 207

7 On the File To Export screen enter or browse to a filename and path for
the exported certificate. Press the Next button.
8 Press the Finish button.
The resulting certificate file is properly formatted and readable by OpenSSL.
In general, it will be necessary to upload the CA certificate only once;
however, it will have to be uploaded again if the certificate is revoked, if it
expires, or if "Restore Factory Defaults" is selected from the serial console
menu.
NOTE:
The instructions above are written for a Microsoft Root CA certificate. For
other CAs, please check with the CA vendor.
NOTE:
The Network Time Protocol (NTP) must be enabled for LDAPS to function.
Figure 9-3. On-board Web Interface - Send Security Certificate
After sending the Security Certificate, the following window displays.
LDAP Feature for the Remote Console Switch
190