Appletalk Protocol Information - HP Jetdirect 310x - Print Server For Fast Ethernet User Manual

Indicates the current NetWare configuration status.
Status
Ready the print server is awaiting data.
Disabled IPX/SPX was manually disabled.
Initializing the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message
[This line appears here only for the 310x
Node
For the 175x, this line appears
Name
In Queue Server Mode (see below), this is the IPX/SPX name of the print server.
It must match a valid print server on the appropriate NetWare file server. The
default name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN
hardware (MAC) address.
In Remote Printer Mode (see below), this is the name specified when you
configured the networked printer. The default name is NPIxxxxxx, where
xxxxxx is the last six digits of the LAN hardware (MAC) address.
The NetWare mode used by the print server:
NetWare
Mode
Queue Server indicates that the print server receives data directly
from the queue. It is also used when the printer is not configured.
Remote Printer with the printer number following it, indicates that
the print server emulates a Novell NetWare remote printer.
Displays the name of the Novell Directory Services (NDS) tree for this printer.
NDS Tree
NDS is a database of objects on a NetWare network, organized in a heierarchical
Name
tree structure.
Not Specified or missing: NDS is disabled.
Displays the fully qualified NDS name where the print server object resides in
NDS
the NDS tree. For
Context>
example: CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
Not Specified or missing: NDS is disabled.
Identifies the Jetdirect discovery method NSQ (Nearest Service Query) or GSQ
Attached
(General Service Query) and the name of the proxy file server used to locate the
Server
configured bindery servers.
Not Specified or missing: A NetWare server has not been
configured.
Specifies the time interval (in seconds) that the print server waits between
SAP
Service Advertixing Protocol (SAP) broadcasts on the network. The default is 60
Interval
seconds.
x identifies a NetWare file server to which the print server is attached.
Server x
Back to Top

AppleTalk Protocol Information

Provides the current status and parameter values for the AppleTalk network protocols.
Message
are displayed if the print server is not ready.
in the IPX/SPX section
Description
instead.]