Enables or disables IPX toner-low notification using PJL:
0 Disables.
ipx-toner-low
1 (default) Enables.
AppleTalk parameters for Telnet
Telnet Parameter
Enables or disables AppleTalk (EtherTalk) protocol operation on the print server:
0 Disables.
at-config
1 (default) Enables.
(read-only parameter) The name of the printer on the AppleTalk network. A number n after the
name indicates that there are multiple devices with this name, and this is the nth instance of the
Device Name
name.
(read-only parameter) Specifies the AppleTalk network printer type reported by the print
Print Type
server.
(read-only parameter) The name of the AppleTalk network zone on which the printer is located.
Zone
(read-only parameter) Indicates whether AppleTalkPhase 2 (P2) is preconfigured on the print
Phase
server.
(read-only parameter) Indicates the current AppleTalk configuration status.
READY Indicates the HP Jetdirect print server is awaiting data.
DISABLED Indicates that AppleTalk was manually disabled.
Status
INITIALIZING Indicates that the print server is registering the node address or name. An
additional status message may also be displayed
DLC/LLC parameters for Telnet
Telnet Parameter
Enables or disables DLC/LLC protocol operation on the print server:
0 Disables.
dlc/llc-config
1 (default) Enables.
Other parameters for Telnet
Telnet Parameter
Description and Values
Description and Values
Description and Values