HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 54

described in the second column of the
Caution: Parameter changes are not saved until step
4. Repeat the previous step to set any additional configuration parameters.
5. When you have finished entering the configuration parameters, at the Telnet prompt enter one of the following
commands, which depend on your system.
save
exit
quit
6. When prompted whether to save settings that you have changed, enter y for "yes", or n for "no".
Illustration of using the menu interface:
Telnet commands and parameters
6 below.
list at the end of this section.