HP Jetdirect 310x - Print Server For Fast Ethernet User Manual page 57

Enables the advanced Telnet commands in addition to the ones generally available. Help will
advanced
include the advanced and general commands.
Disables the advanced Telnet commands; only the general ones will be available. Help will
general
exclude the advanced commands.
Exports the Telnet settings to a file for editing and importing via Telent or TFTP. This
export
command is only supported by systems such as UNIX that support input/output redirection.
Saves the Telnet settings and exits the Telnet session.
save
Exits the Telnet session.
exit
General settings for Telnet
Telnet Parameter
The administrative password (up to 16 alphanumeric characters) for both Telnet and the
embedded web
name and this password.
passwd
Enter the password twice for confirmation. For example:
passwd jd1234 jd1234 sets the password to "jd1234".
To clear the password, enter the command without the two password and confirmation entries.
Identifies the physical location of the printer (SNMP sysLocation object). Only printable
sys-location
ASCII characters are allowed. The maximum length is 255 characters.
ASCII character string (up to 255 characters) that identifies the person who administers or
sys-contact services the printer (SNMP sysContact object). This may include how to contact this
person.
TCP/IP main parameters for Telnet
Telnet Parameter
Specifies the node name (up to 32 alphanumeric characters) that will appear on the Jetdirect
host-name configuration page. Default is NPIxxxxxx, where xxxxxx is the last six digits of the print
server's hardware address (MAC or LAN address).
Description and Values
server). When initiating the next Telnet session, you will be prompted for a user
Description and Values