Installing A Pci Card Support Bracket - HP Xw6600 - Workstation - 2 GB RAM Technical Reference Manual

4. For a tall PCI card, press down on the support (2) while also pressing up on the small release tab
protruding from the left under-side of the bracket (1), as shown in the following figure.
Figure 4-34

Installing a PCI card support bracket

To install the PCI card support bracket:
1. Disconnect power from the system (see
2. Remove the side access panel (see
ENWW
Removing a tall PCI card support bracket
Predisassembly procedures on page
Side access panel on page
Removing and replacing components
52).
58).
81