Install Options - HP D5970A - NetServer - LCII Installation Manual

Chapter 1
Support Information
(continued)

Install Options

WARNING
The following upgrades (PCI cards, memory DIMMS,
processor modules, and video memory) require removing the
top cover from the HP NetServer LPr. BE SURE to disconnect
power from the unit before opening it. BE SURE to observe
appropriate ESD precautions when handling electronic
components.
Add Hard Disk
Drives
Setting Up the HP NetServer LPr
HP NetServer LPr Installation Guide
This document supports installation, hardware
upgrades, configuration, and troubleshooting of
systems based on the HP NetServer LPr.
Information Assistant
A hypertext system that contains the entire set
of documentation for the LPr. It is on the HP
NetServer Online Documentation CD-ROM.
See Chapter 12 for details on using this.
Technical Reference Card
A card that summarizes key technical data on
the LPr. It is in an envelope attached to the
inside of the LPr's top cover.
You may choose to wait until after the LPr chassis is
mounted in the rack to add hard drives.
For details see Chapter 4, "Installing Mass Storage
Devices."
3